Solar Garden Light Controller CLP01

 

 

The product can automatically manage the work of Solar Panel and battery in Solar Garden Light System, which is below 6W (12V) or below 12W (24V). It’s small in size and waterproof.

 

 

I. Function:

  1. Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights.
  2. Controller will start the lighting system in the evening automatically according to the surrounding luminance.
  3. Controller can automatically shut down the lighting system:

A: Automatically shut down the light at dawn when battery is full.
B: Automatically shut down the light when battery is low.

II. Connection (As indicated in diagram): 
floodlight

 

 

 

 

 

  1. Connect the “+”, “- ” Poles of the battery to the correct wires (bottom)of controller (the RED wire is “+”).
  2. Connect the “+”, “- ” Poles of the solar panel to the correct wires(left) of controller (the RED wire is “+”).
  3. Connect the “+”, “-” Poles of the load to the correct wires (right) of controller (the RED wire is “+”).

 

Notice:

  1. Please make sure the rated voltage of solar panels, batteries the loads are same and are all 6V or all 12V.
  2. The rated current of solar panels and load must be less than 1A.
  3. Load must not be shot circuit.
  4. Using other electrical power to charge the battery through Controller is strictly prohibited!

The Specifications:

Rated Voltage

12V/6V

Supply-stop Voltage

10.5V/5.3V

Rated Charge Current

1A

Supply-resume Voltage

12.0V/6.0V

Rated Load Current

1A

Light Control Mode

Visibility 20M

Charge-stop Voltage

14.4V/7.2V

Working Temp

10- +40℃

Coefficient of Stop Voltage and Temp

-3mV//cell

Relative Humidity

90%

Size

55×36×20mm

Weight

33g

 



Copyrights reserved 2008. Goland Century Co.,Ltd. China- Power Inverter